Whether you're outfitting a concession stand or just adding a vending point to a storefront, the first question is whether you need a complete machine or a replacement part. These four options cover both sides: a full sticker/tattoo vendor, a tabletop candy machine, and two repair keypads for existing snack machines. The listed prices run from USD 91.69 to USD 409.99, so your choice mostly comes down to what you already own and what you want to vend.
Quick Take
If you already have a USI/Fawn snack machine with a worn keypad, the FSI/USI keypad gives you the most direct fix. If your machine uses the SM6/SMVI control board, the USI Wittern keypad is the correct replacement. If you need a complete unit for flat vendibles like stickers, tattoo transfers, or sports cards, the 1 Vend Red 3 Column is the only full machine here. And if you just want the lowest-priced candy vending setup, the 25-inch white candy machine is your entry point.
Listed Price Comparison
| Product | Listed Price | Price Bar | Best For |
|---|---|---|---|
| 1 Vend Red 3 Column Sticker Tattoo Pokemon Card Vending Machine Sports Cards | USD 409.99 | Complete sticker/tattoo vend unit | |
| FSI, USI 3013A, 3014A, 3015A SNACK VENDING MACHINE KEYPAD (#4201202) New | USD 149.99 | Repairing USI/Fawn snack machines | |
| USI Wittern 3160, 3208, Combo Snack Mart 6 Vending Machine Keypad Key Pad | USD 159.99 | Repairing USI Wittern SM6/SMVI setups | |
| 25 in Commercial Vending Machine Vending Machine Candy Vending Machine White | USD 91.69 | Low-cost candy vending |
Decision Matrix
| If You Need... | Choose This | Why |
|---|---|---|
| A complete machine for flat items like stickers, tattoo transfers, or sports cards | 1 Vend Red 3 Column Sticker Tattoo Pokemon Card Vending Machine Sports Cards | Three-column vend unit with lock and key, ready for flat-pack items |
| A repair keypad for a compatible USI/Fawn snack machine | FSI, USI 3013A, 3014A, 3015A SNACK VENDING MACHINE KEYPAD (#4201202) New | Fits a wide range of 3013A/3014A/3015A and similar models |
| A keypad for a USI Wittern machine using the SM6/SMVI board | USI Wittern 3160, 3208, Combo Snack Mart 6 Vending Machine Keypad Key Pad | Works with 3160, 3208, and Combo Snack Mart 6 setups |
| The most affordable way to start vending candy | 25 in Commercial Vending Machine Vending Machine Candy Vending Machine White | Twist-knob candy dispenser at the lowest listed price in this group |
Product Notes
#### 1 Vend Red 3 Column Sticker Tattoo Pokemon Card Vending Machine Sports Cards
This red three-column vend unit is the one to pick when you want a complete machine for flat items like stickers, tattoo transfers, or sports cards. It measures 14 by 19 by 9 inches, comes with a lock and key, and has a coin mechanism set to a $1 vend. The unit is sold as new open box, and the note about possible coin-mechanism variation is worth weighing before purchase. At USD 409.99, it's the highest price in this group, so you're paying for a finished machine rather than a repair part. The limitation: if you only need to repair an existing snack vendor, this full machine is more than most operators will spend.
#### FSI, USI 3013A, 3014A, 3015A SNACK VENDING MACHINE KEYPAD (#4201202) New
This keypad replaces worn selection buttons on USI, FSI, Fawn, and Wittern snack machines. It fits 3013A, 3014A, 3015A, plus 3039, 3044, 3045, 3046, 3076, 3077, 2097, 2098, and 2099, and carries part number 4201202. The control board is not included, so you're buying only the keypad. At USD 149.99, it's a mid-priced repair option and substantially less than buying a whole machine. The limitation is compatibility: if your snack machine is not in that model range, this part won't help. If your existing machine matches, this is the direct, low-friction fix for unresponsive keys.
#### USI Wittern 3160, 3208, Combo Snack Mart 6 Vending Machine Keypad Key Pad
This keypad targets USI Wittern 3160 and 3208 models plus Combo Snack Mart 6 machines. It uses part numbers 4211472 and 4210951.005 and works with any USI snack machine that runs an SM6/SMVI control board. At USD 159.99, it sits close to the FSI/USI keypad in price, but it's the right choice when your machine's board matches. The limitation: it won't work on USI CB700 or CB500 models, even though the physical part looks similar. If your setup uses a CB-series board, look elsewhere. If it uses SM6/SMVI, this is the listed replacement.
#### 25 in Commercial Vending Machine Vending Machine Candy Vending Machine White
This white candy machine is the lowest-priced entry in the comparison. It uses a twist-knob mechanism, so there's no programming to deal with. The housing is made from ABS and aluminum alloy, with top cover locks and a money box lock. That makes it a reasonable fit for retail stores, amusement parks, hypermarkets, parks, and game halls. The limitation is the vend type: it's a candy dispenser, not a flat-goods machine, so it won't work for sticker packs, card packs, or tattoo sheets. For simple, low-cost candy vending on a small footprint, this gets the job done without the higher price of a full three-column flat-pack machine.
Bottom Line by Use Case
- Choose the 1 Vend Red 3 Column when you need a complete machine for flat items and are comfortable with the higher listed price.
- Choose the FSI/USI keypad when you have a compatible USI/Fawn snack machine and only need to replace the worn keypad.
- Choose the USI Wittern keypad when your machine uses the SM6/SMVI control board and you need a replacement for 3160, 3208, or Combo Snack Mart 6.
- Choose the 25-inch white candy machine when your priority is the lowest-priced, twist-knob candy vending unit.
